Green House Manual
Page | 14
7.
Once you have verified, install your second pipe. Again, make sure it is installed on the
OUTSIDE
of the mark you made.
8.
Make sure both door pipes are even.
Inwall pipes
Now that you have your ground door pipes in place, we will proceed with the door inwall pipes.
1.
Locate your inwall pipes, slide one into the other and place them in your ground pipes without
screwing them down.
2.
You will notice that they are longer than the top of your greenhouse. Using a level, make a mark
on your inwall pipe where the top of the pipe meets the top of your front bow. That is where
you will cut the inwall pipe.
3.
You will also make a mark on that same position but on the back of your front bow so you where
it is level when you put it back up after cutting it.
Mark you made on
your inwall pipe
where you will cut.
Mark you made on the
back of your front bow
to outline where the
cut piece will attach.
