Instruction Manual
Radio control devices T3, T5 and T7 @
2G4
version 1.3 January 14
REM
device
®
- ITALY
page 19 of 28
PROGRAMMING THE RADIO CONTROL
DEVICE
Changing the frequency
The operation of changing frequency is carried out only on the
transmitter, the receiver is tuned automatically.
•
Release
the
red
Stop/Emergency
mushroom button.
•
Press the buttons
1
and
7
together and
simultaneously the Start button
S
, and
release.
•
The set channel is indicated first with
the tens (number of pulses of the red
Led), then with the units (number of
pulses of the green Led).
•
Example: channel 23 is displayed with 2
pulses of the red Led and three pulses
of the green Led.
•
The frequency values are given in the
table on the facing page.
At the end of this sequence the transmitter has entered
frequency
changing
mode
•
Each time button
1
is pressed, the
CHANNEL –
function is
obtained (units)
•
Each time button
2
is pressed, the
CHANNEL +
function is
obtained (units)
•
Each time button
3
is pressed, the
CHANNEL – 10
function is
obtained (tens)
•
Each time button
4
is pressed, the
CHANNEL +10
function is
obtained (tens)
•
The set channel is indicated first with the tens (number of pulses
of the red Led), then with the units (number of pulses of the
green Led).
•
Once the desired frequency value has been set, press the red
Stop/Emergency mushroom button and wait at least 3 seconds,
then release it.
•
Press the START button
S
for a few seconds and hold it down
until the machine starts.
1
2
3
4
5
6
7
S
RED LED
(TENS)
GREEN LED
(UNITS)
Figure 10
Instruction Manual
Radio control devices T3, T5 and T7 @
2G4
version 1.3 January 14
page 20 of 28
REM
device
®
- ITALY
Tables of frequencies
Band 2.4 GHz
CH
6
2.41075
CH
7
2.41275
CH
8
2.41475
CH
9
2.41675
CH
10
2.41875
CH
11
2.42075
CH
12
2.42275
CH
13
2.42475
CH
14
2.42675
CH
15
2.42875
CH
16
2.43075
CH
17
2.43275
CH
18
2.43475
CH
19
2.43675
CH
20
2.43875
CH
21
2.44075
CH
22
2.44275
CH
23
2.44475
CH
24
2.44675
CH
25
2.44875
CH
26
2.45075
CH
27
2.45275
CH
28
2.45475
CH
29
2.45675
CH
30
2.45875
CH
31
2.46075
CH
32
2.46275
CH
33
2.46475
CH
34
2.46675
CH
35
2.46875
CH
36
2.47075
CH
37
2.47275
CH
38
2.47475
CH
39
2.47675
CH
40
2.47875
Conformity
The t7 series radio control devices working in the frequency band 2.4 GHz
complies with the essential requirements of the following regulations:
- FCC (Federal Communication Commission) Part 15
transmitter FCC ID = RTF-
TX2G4T7
receiver FCC ID = RTF-
RX2G4ARBT
- IC (Industry Canada) RSS-102
transmitter IC number = 11555A-
TX2G4T7
receiver IC number = 11555A-
RX2G4ARBT
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The radio working frequency for Remote Controls is defined
on each Country by specific laws and standards.
Not only for Remote Controls but also for any System
composed by an Equipment wireless controlled, they shall
comply with such laws and standards.
