Instruction Manual
Radio control devices T3, T5 and T7 @
2G4
version 1.3 January 14
REM
device
®
- ITALY
page 5 of 28
Transmitter T3 - Transmitter T5
Transmitter T7
GREEN LED
(ON)
RED LED
BATTERY
STOP/EMERGENCY
BUTTON
START
BUTTON
GREEN LED
AUX FUNCTION
AUX
BUTTON
Figure 1
CONTROL
BUTTONS
CONTROL
BUTTONS
Instruction Manual
Radio control devices T3, T5 and T7 @
2G4
version 1.3 January 14
page 6 of 28
REM
device
®
- ITALY
Activation
1- Turn and release the Stop/Emergency button (Figure 1): power is
supplied to the transmitter.
2- Press the START button. Activation is indicated by the blinking of
the green led (ON) at intervals of about 1 second. If the transmitter
gives a Beep accompanied by the lighting of the red led, check to
make sure that other buttons have not been pressed. If the receiver
is ready too, you should hear the sound of the obligatory acoustic
warning installed on the operating machine.
Use of the radio control device
Press the control buttons for the desired function, taking care as they
may be of the type with a sequential double click: by increasing the
pressure on the button, a second contact is made that is normally
assigned to increasing the speed of a machine movement.
If any kind of difficulty occurs in controlling the operating machine
(for mechanical or electrical reasons, or at any rate independent of
the intentions of the operator), immediately press the red
Stop/Emergency mushroom button.
The radio control device has an automatic interlock on the controls of
opposite or incompatible functions: for example, Up/Down,
Left/Right, Forward/Back.
Periodically check the efficiency of the red Stop/Emergency
mushroom button.
Switching off
Press the red Stop/Emergency mushroom button.
At the end of the manoeuvres, and anyway before putting the
transmitter away, always switch it off.
Do not leave the transmitter unattended when switched on and
unlocked.
Put the transmitter away in a safe place, inaccessible to unauthorised
persons.
Never entrust the transmitter to unskilled personnel.
