Reloop RMP-3, Instruction Manual

Page: 3 / 28

ENGLISH
29
• The device must not be operated after being taken from a cold environment into a warm environ-
ment. The condensation caused hereby may destroy your device. Do not switch on or operate the
device until it has reached ambient temperature!
• Controls and switches should never be treated with spray-on cleaning agents and lubricants. This
device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a pet -
roleum base for cleaning.
• When relocating, the device should be transported in its original packaging.
• When starting operation the cross-faders and volume controls of your amplifier must be set to mi
-
nimum level. Bring the loudspeaker switches into the „OFF“ position. Wait between 8 to 10 seconds
before increasing the volume to avoid shot noise created by transient effect, which could cause
damage to loudspeakers and the diplexer.
• Always ensure that you place scratch-free, clean CDs into the player. When placing the CD into the
tray, your hands should also be clean.
• To keep the laser head clean always close the CD tray.
• Devices supplied by voltage should not be left in the hands of children. Please exercise particular
care when in the presence of children.
• At commercial facilities the regulations for the prevention of accidents as stipulated by the asso -
ciation of professional associations must be observed.
• At schools, training facilities, hobby and self-help workshops the operation of the device must be
monitored with responsibility by trained staff.
• Keep this operation manual in a safe place for later reference in the event of questions or problems.
attENtION: In the unlikely event of a return, please use the original packaging only to proper-
ly protect the equipment against any damage caused during transport. Damage caused during
transport as a result of improper packaging could entail the cessation of the guarantee. The ma
-
nufacturer does not accept liability for damage caused during transport as a result of improper
packaging of a returned shipment to the seller. Such cost is for the account of the sender!
APPLICATION IN ACCORDANCE WITH REGULATIONS
• This device is a professional MP3 Player, CD Player, USB Media Player and MIDI Controller that can
be used to control software and play music in the MP3 format.
• This product is authorised for connection to 230 V, 50 Hz and is designed exclusively for indoor
application.
• If the device is used for any other purposes than those described in the operation manual, damage
can be caused to the product, leading to the exclusion of implied warranty rights. Moreover, any
other application that does not comply with the specified purpose harbours risks such as short
circuit, fire, electric shock, etc.
• The serial number determined by the manufacturer must never be removed to uphold the implied
warranty rights.
MaINtENaNCE
• Check the technical safety of the device regularly for damage to the mains line or the casing, as
well as for wear of wear parts such as rotary and sliding switches.
• If it is to be assumed that the safe operation is no longer feasible then the device must be discon-
nected and secured against accidental use. Always disconnect mains plug from the outlet!
• It must be assumed that a safe operation is no longer feasible if the device bears visible defects,
if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress.
CAUTION LASER RADIATION!
This device is equipped with two Class 1 laser diodes. To ensure
a safe operation do not remove any covers or try to access the
inside of the equipment. The inside of the device does not con -
tain any parts which are subject to maintenance. Maintenance
must only be carried out by qualified staff.
IM_RMP3_GB.indd 29 03.11.2009 09:18:33