ENGLISH
20
2. Using the Reloop Database Builder
In order to use the Reloop Database Builder and analyze your USB storage device proceed as follows:
Your USB device will now be analyzed.
After a successful analysis you can exit the program. Your USB device has now
been analyzed and is ready to be used with the media player.
Start the installed program. As first step select the desired USB
storage device and then click the “Build” button.
21
ENGLISH
5.2 Trouble Shooting
Symptoms
Possible Cause
Corrective Measures
The device does not receive any power
when turning it on via the ON/OFF Button
-1-.
Mains adapter has not been connected
correctly.
Check the mains adapter connection.
The CD's playback does not begin.
The CD has been inserted upside down or
it is dirty.
Insert the CD with the label showing up;
clean the CD.
CD is skipping.
The CD player is permanentely subject to
strong vibrations or impact for more than
10 seconds.
Set up the sound system in a different place.
The USB device cannot be recognized.
The USB source has not been selected.
The USB device has been formated in a
not supported file system.
The external USB hard disk requires more
power than the Reloop media player is
able to provide.
There are no compatible MP3 files on the
USB device.
Use the Media Select Button -5/46- in order to select
the correct USB port.
Please format the device correspondingly. The suppor-
ted file systems can be found in the chapter „Technical
specifications“. If you are not sure use the Database
Builder (chapter „Database Builder Software“) in order
to correctly format the device.
Please use a suitable mains adapter for your hard disk.
Please copy compatible MP3 files (see chapter „Techni
-
cal Specifications“) to your USB device.
No sound.
The output cord is not connected at all or
correctly; faulty amplifier or mixer usage.
Check the output cords' connections and the ampli-
fier and mixer settings.
Humming noise.
Loose cable connections.
Check all audio connections.
It is not possible to carry out the Database Builder.
This could be caused by restricted user settings.
Click on the right mouse button and select the option
“Carry out as administrator”.
Have fun with your Reloop!
Reloop - Solutions for DJs
Global Distribution GmbH, Schuckertstraße 28,
48153 Muenster, Germany, Fax +49.251.6099368,
www.reloop.de
NOTE!
While using the Database Builder some problems may occur under Windows Vista and Windows 7. Please observe the following trouble shooting:
As next step click on “Allow” in order
to carry out the Database Builder.
