Relative workshop V3 M-Series, Owner'S Manual

Page: 47 / 84

V E C T O R O W N E R ’ S M A N U A L
Page • 47
STANDARD DEPLOYMENT BRAKE
SYSTEM.
1. After the canopy is inspected, use the
toggle to pull the right-hand steering line
down until the brake loop just passes
through the guide ring.
2. Insert the tapered end of the toggle all
the way into the loop.
3. Pull on the steering line above the guide
ring to seat the toggle against the ring. Mate
the toggle hook and loop fastener with that
on the riser. Check to be sure the tapered
end of the toggle is completely seated in the
loop (
It shouldn’t be inserted past the end of the
taper, or it may be difficult to extract in the air
).
section 4 : setting tru-lok deployment brakes