Relative workshop V3 M-Series, Owner'S Manual

Page: 62 / 84

V E C T O R O W N E R ’ S M A N U A L
Page • 62
4. Bring the white loop over and through
the small ring only, and then through the
riser grommet so it protrudes out the back
of the riser.
5. Continue threading the white loop
through the cable housing grommet on the
end of the cable housing. The flat side of the
cable housing grommet should be against
the riser.
6. Thread the yellow cable through the
white loop, making sure the loop isn’t
twisted. Be careful not to bend or kink the
cable as you insert it through the white loop.
Insert the remaining free end of the cable
into the channel which is on the back of the
riser.
section 5 : booth 3 ring assembly