RELACART WAM-402, User Manual

Page: 31 / 44

WAM­402
AUTOMATIC MIXER
31
UD­1 Gooseneck Microphone
On/off button
Backlit display
(indicates frequency, channel and battery
status)
Infrared interface
Gooseneck
Microphone with LED ring
Battery compartment
Battery compartment cover
Low Cut selector
Gain control
Control functions
Button Function
On/off
• Press shortly to switch on the microphone
• Keep pressed for approx. 3 sec to switch off the microphone
LOW CUT
• left position = low­frequency signal components below 120 Hz (e.g.
impact noise) are eliminated
• right position = the low cut filter is disabled
GAIN
• For adjusting the input sensitivity from ­10 dB to +10 dB
Inserting batteries
Remove the battery cover, insert two 1.5 V AA batteries as indicated in the compartment and replace
the battery cover. With new batteries, the microphone can be operated for approx. 10 hours. The
capacity of the batteries is indicated in the display. Replace the batteries when the battery icon only
shows one bar. If the microphone is not used for a longer period, please remove the batteries to prevent
damage in case of battery leakage.