Introduction
9
REHM Operating concept
The TIGER has an entirely new operating concept; this enables setting up the
machine very simply, quickly and safely. The numerous options can all be
accessed from this single control knob The settings are all done via a single
control knob, this can be turned to select or alter the parameter and then
pressed to confirm the setting. Using the combination of LED’s and the 3
-digit
digital display the setting can always be accurately set and reproduced for all
welding applications.
REHM Noise Reduction System for AC
The noise is significantly reduced during the welding of Aluminium, by means
of a patented noise reduction process.
REHM Automatic Frequency Control
Low stress and long service life combined with optimum economy by means
of patented Automatic frequency control.
REHM Wave Balance Control
Improved welding speed by the use of a small diameter electrode, combined
with optimum penetration.
REHM
A
DAPT
®
System
The processor control system makes this generation of welding units ready to
face the future. New process variants and application developments can
simply be retrofitted by means of a software updates.
REHM Dual Wave
The Dual Wave is a newly developed welding process for the welding of
Aluminium or its alloys. This process enables a much more controllable
welding pool and better welding results.
REHM INTIG-Energy (Intelligent Ignition Energy)
INTIG-Energy results in an intelligent control sequence for both TIG and stick-
electrode welding. The ignition process takes into consideration the welding
process that has been selected and is controlled via the processor. This
results in a reliable start every time with a stable arc, cleaning the electrode
and the workpiece.
REHM ELSA-System (Electronic Stabilised Arc)
The ELSA-System: The optimum welding performance, even with mains
supply cables up to 100m long is ensured.
REHM EPC (Electronic Power Control)
The EPC continuously monitors the mains supply voltage and protects the
machine under critical situations.