Accessories
37
4.7
Tiger-Mechanised welding (Article No. 148 0100)
The
option
mechanised welding enables the Tiger to be used in conjunction with
simple automated applications. The connection is via the standard 7-pole torch
connection socket. The following signals are available:
Torch socket Pin1:
Welding cycle On/Off
Torch socket Pin2:
GND
Torch socket Pin3:
Switching to current I2
Torch socket Pin4:
+5V
Torch socket Pin5:
Set value for I1
Torch socket Pin6:
Arc established signal (AES)
Torch socket Pin7:
Earth
Machines fitted with the mechanised welding interface the machine can also be
used with the options described in chapter 4.1 to chapter 4.4. Note: the automatic
setting of non-latch (2 step) and the minimum upslope and downslope does not
operate, and must be set manually.
