4
Safety Instructions
The manufacturer declares that the SRS2 TE Solar Controller is marked with the CE
mark and conforms to the following relevant safety regulations:
- Directive 20
14
/
3
5/E
U
-
E
U
low voltage directive
- Directive 20
1
4/
30
/E
U
- E
U
electromagnetic compatibility directive
A.1 EC Declaration of Conformity
These installation and operating instructions contain basic instructions and important
information regarding safety, installation, commissioning, maintenance and the optimal
use of the unit. Therefore these instructions must be read completely and understood
by the installation technician/specialist and by the system user before installing,
commissioning and operating the unit. The installation shall be done in compliance
with valid standards and rules. The controller does not under any circumstances
replace any safety devices (e.g. safety valve, air vent valve etc.) to be installed into
a solar circuit! Installation of the unit may only be carried out by a specialist who is
trained on the required level.
For the user:
Make sure that the specialist gives you detailed information on the
function and operation of the controller. Always keep these instructions in the vicinity
of the controller. Any changes to the controller or tampering with may pose a risk to
safe operation of the appliance and to the complete solar thermal system..
A.2 General information
Danger
Caution
A.3 Explanation of symbols
Failure to observe these instructions can result in danger to life from
electric voltage.
Danger
Failure to observe these instructions can result in serious damage to
health such as scalding, or even life-threatening injuries.
Warning
Failure to observe these instructions can result in destruction of the unit
or the system, or damage to the environment.
Information especially important for the function and optimal use of the
unit and the system.
- please read carefully!
