46
S 2.16 – Output test
When Output test in Service Menu is entered, all outputs from the Controller are switched off.
Then separate outputs can be tested. The output turns on when a display with the name of
the output in question is shown and the option test = 1 selected. On leaving a display with the
option test = 1, the respective output switches off.
termin
Terminal number for the respective Controller output.
operat
Name of the output function.
test (0,1)
Output setting for test, 1 means output on.
S 2.17 – Universal CIB module
This is a universal add-on module for IR12 controllers.
The module features the following functions:
•
turning the module on
•
thermostat 1
•
thermostat 2
•
differential thermostat
•
delay
•
overrun
•
timer
The function logic is designed in such a way that the output is closed when the add-on
module is switched on and all the permitted functions are fulfilled, see fig. below. A function
not permitted is equivalent to a closed switch.
It is obvious from the picture that the Delay function can delay signal from thermostat and
diff. thermostat functions, the Overrun function can hold disconnection (switching off) from
