26
Mixing valve:
shift time (sec)
Setting the shift time between end positions of the mixing valve.
manual gain
If the preset value is not acceptable and the control shall be slowed
down/speeded up, the switch shall be turned to yes. Then the following item,
gain, can be changed.
gain
determines the speed of control. The lower the parameter, the slower is the
control. It is not recommended to use values above 1.5. Such values can
cause valve cycling.
turn pump OFF (on/off)
If this function is on, the zone circulation pump will switch off when the
temperature in zone reaches the desired value (with ± 0.3 °C
difference).
OTC setback (°C)
Setting the heating water temperature drop for transition from Day to
Setback mode.
