│
14
Sentinel Kinetic Advance S, SX - www.regulus.eu
Floor Mounting the Unit (Alternate Method)
Step 1:
The unit has four 12mm deep fixing holes on
the underside suitable for 6mm diam. screws. The
holes are configured to allow fitment of most stan-
dard kitchen foot types (not supplied).
Step 2:
Mount your chosen foot type to the
underside of the unit using appropriate fixings.
Step 3:
Adjust your chosen foot type to
ensure the base of the unit is horizontal
in both axis.
The manufacturer recommends that where possible,
the wall bracket is used in conjunction with any floor
mount solution to prevent the unit from tipping.
Step 4:
Mark the wall bracket position using the
dimensions shown. Note the position of the top of
the
unit in relation to the wall bracket. Ensure the bracket
position is parallel to the floor.
Step 5
: Attach the wall bracket to the
wall or batten using appropriate fixings.
(As shown on page 12).
Step 6:
Lift the unit and locate the two
hooks on the rear onto the wall bracket
prior to fixing the unit to the floor. (As
shown on page 12).
7
