Regency Fireplace Products Horizon HZ40E Owners & Installation Manual Download Page 57 | Manualshive

Page: 57 / 80

background image

Regency Horizon® HZ40E-11 Gas Fireplace

|

57

installation

Glass Crystals or Optional Stones
Installation On Burner

Spread the Glass Crystals or Stones evenly over the burner. Ensure the crystals/stones do not overlap excessively as this will affect the flame pattern.

IMPORTANT NOTE:

Only the supplied approved Glass Crystals and Stones are to be used with these fireplaces. Use of any other type of glass crystals or stones can alter the
unit's performance. Any damage caused by the use of any unapproved glass or stones will not be covered under warranty.
When using Ceramic Spa/Volcanic Stones ensure required glass crystals/beads are used as a base.

DO NOT

overstack Ceramic Spa Stones or Volcanic

Stones on burner or in the pilot area.
Do not add Basalt Volcanic Stones when using driftwood log set.

BURNER PACKAGES

Unit

*Glass Crystals Fire Beads

Stones - Spa / Ceramic / Volcanic

HZ40E

2lbs

3lbs

1.5 lb Glass + 30 Ceramic Stones or 1.5 lb Glass + 25 Volcanic Stones
2 lb Beads + 30 Ceramic Stones or 2 lb Bead + 25 Volcanic Stones

NOTE:

*

Glass Crystals are not supplied with the unit. Must purchase separately - see quantities above

Optional Pebbles/Glass Crystal Installation for Firebox Base (Around Burner)

Firebox (Around Burner) Packages

Unit

Glass Crystals

Fire Beads

Pebbles

HZ40E

5 lbs

5 lbs

2 packages (6 x bags pebbles)

There are 2 optional packages to choose from to cover the firebox base:

1)

Natural River Pebbles

2)

Glass Crystals (4 colors available)

Spread the pebbles / crystals evenly on the exposed base of the firebox. Pebbles are

NOT

to be placed anywhere on the burner or over top of the Glass

Crystals or optional Stones.

IMPORTANT NOTE:

Only the supplied and approved pebbles / glass crystals are to be used with these fireplaces. Use of any other type of pebbles, glass
crystals or other material can create a danger and will void the warranty.

Optional Volcanic Glass Crystals shown on burner.

NOTE:

Stone quantity will vary dependant on the model and may

not be exactly as shown in photo.

Natural River Pebbles shown surrounding the Horizon Burner

Glass Crystals shown surrounding the Burner

«
...
55
56
57
58
59
...
»

Summary of Contents for Horizon HZ40E

















































































Reviews:

No comments

Related manuals for Horizon HZ40E

CGCDV36NR SERIES

Brand: Desa Pages: 44

Brand: Empire Comfort Systems Pages: 4

Smart Bell 65/55 MF

Brand: Bellfires Pages: 48

Brand: HAMPTON BAY Pages: 36

Brand: Be Modern Pages: 8

Brand: bio chimenea Pages: 8

Antigua PIT1015A

Brand: Safavieh Furniture Pages: 3

Brand: decorflame Pages: 21

Brand: Vents Pages: 28

Brand: wiking Pages: 4

Village QV36D-A

Brand: Quadra-Fire Pages: 35

Kingsman ZDV3624NB

Brand: R-Co Pages: 30

Brand: KEKAI Pages: 46

Brand: Kingsman Pages: 13

Direct Vent Gas Appliance CD4236MILR

Brand: Heatilator Pages: 84

Fiery Rock OFG147NG

Brand: ELEMENTI Pages: 20

Brand: IHP Pages: 2

Brand: IHP Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands