28
|
Regency Horizon® HZ40E-11 Gas Fireplace
installation
Vent restriction is required for certain venting installations, see the diagrams in the "Venting
Arrangements" section to determine if they are required for your installation.
The Vent Restrictor plate is located on the inside top of the firebox.
To set the vent restriction as indicated in the venting arrangements diagrams, refer to the following instructions;
1.
Remove the glass door - see instructions in this manual.
2.
Remove the screws that hold the vent restrictor plate in place.
3.
Adjust the vent restrictor plate to the required vent restrictor position as per the diagrams shown.
4.
Once the vent restrictor plate is in the required position, secure with screws.
Vent Restrictor Position
Set 0
(Factory set)
VENT RESTRICTOR
AT 3"
Set 1
VENT RESTRICTOR
AT 2"
Set 2
VENT RESTRICTOR
AT 1-1/2"
Set 3
VENT RESTRICTOR
AT 1"
Summary of Contents for Horizon HZ40E
Page 71: ...Regency Horizon HZ40E 11 Gas Fireplace 71 notes ...
Page 76: ...76 Regency Horizon HZ40E 11 Gas Fireplace warranty ...
Page 77: ...Regency Horizon HZ40E 11 Gas Fireplace 77 notes ...
Page 78: ...78 Regency Horizon HZ40E 11 Gas Fireplace notes ...
