Regency Fireplace Products CF780, Owners & Installation Manual

Page: 9 / 56

TABLE 1 - UNIT CLEARANCES AND SPECIFICATIONS
A* Distance to combustible material from side, back, and standoffs
0’’ (0mm)
B Clearance from Top of unit: No combustible material: only steel stud on Front,
Top edge, and sides
C
Minimum distance from side wall to the side of the fireplace opening 24” (610mm)
D Minimum ceiling clearance: Always take measurement from the lowest point on
the fireplace,; Including Base–Radiation Shield
- When the bottom standoff is installed, measure from the base of the bottom
standoff to the ceiling
(refer to the “INSTALLATION: Flooring Requirements” section for details)
8’ (2.44m)
E Minimum chimney height: minimum total chimney height from fireplace top to
below the chimney rain cap
12' (3.66m)
F
Maximum chimney height: maximum total chimney height from fireplace top to
below the chimney rain cap
60' (18.3m)
G
Maximum chimney height supported by the fireplace
15' (4.57m)
H
Minimum depth of non-combustible hearth extension: from the front of the fireplace
(refer to the “INSTALLATION: Hearth Extension” section for details)
20" (508mm)
I Minimum width of non-combustible hearth extension: total width, must be cen-
tered on the firebox opening (refer to the “INSTALLATION: Hearth Extension”
section for details)
61-3/8" (1559mm)
J Minimum width of the spark guard
61-3/8" (1559mm)
K Maximum mantel shelf depth (see Table 2 for other mantel sizes)
12" (305mm)
L Minimum height of a combustible mantel shelf above the top of the fireplace
opening (to the bottom of the combustible mantel) (refer to the “INSTALLATION:
Mantel” section for details)
See Table 2
M
Maximum mantel leg depth (see Table 3 for other mantel leg sizes)
12" (305mm)
N Minimum distance between each combustible mantel leg and the fireplace open-
ing (refer to the “INSTALLATION: Mantel” section for details)
See Table 3
*
Note: For 45°corner installs: 3" clearance is required from back corners of unit.
A=3
"
A=3
"
CF780 Wood Fireplace
|
9
installation