Regency Fireplace Products Cascades I2500 Owners & Installation Manual Download Page 3

Page: 3 / 40

Regency I2500M

table of contents

safety label

Safety Label For I2500 ..................................................4

unit dimensions

Unit Dimensions ...........................................................5

installation

operating instructions

Operating Instructions .................................................22
Draft Control ................................................................22
First Fire ......................................................................22
Fan Operation ..............................................................23
Ash Disposal ................................................................23
Safety Guidelines and Warnings .................................23

maintenance

parts

Main Assembly & Options - I2500 ...............................28
Faceplates - I2500 .......................................................29
Brick Panels - I2500....................................................30
Combustor Assembly - I2500 .....................................31

warranty

Warranty .....................................................................32

ALL PICTURES / DIAGRAMS SHOWN THROUGHOUT THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY.
ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENTS.

CAUTION:

To avoid burns or wood splinters, when opening/closing the fuel

door or adding wood to the fire, You should always wear appropriate protective
gloves to protect your hands from the heat being emitted from this fireplace.

Summary of Contents for Cascades I2500









































Search results

Summary of Contents for Cascades I2500

Reviews:

Related manuals for Cascades I2500

Brands by name

Popular brands

Regency Fireplace Products Cascades I2500, Owners & Installation Manual

Search results

Summary of Contents for Cascades I2500

Reviews:

Related manuals for Cascades I2500

Brands by name

Popular brands