7
3. Product Description
The electric flight model “QuadroCopter 650 V2 ARF MEMS” is pre-assembled as far as possible. In the professional
field, such flight devices are already used for the most diverse of tasks. The latest micro processor controlled electron-
ics with position control and acceleration sensor stabilise the QuadroCopter.
The essential differences to the predecessor model "QuadroCopter 650" (Conrad order no. 209300) are the higher-
quality sensors in MEMS technology, an "agility mode" and an improved control and regulation software. Together, the
changes lead to better flight characteristics and enable simple freestyle flight in "agility mode".
Additionally, the PCB layout was entirely redesigned to create interfaces and connection options for future additional
modules. Instead of pin strips, the mode is set with DIP switches.
High quality brushless DC motors paired with a specially developed drive enable long and powerful flight operation
while still providing reserve for transporting loads such as cameras, etc. The novel steering and the electronic self-
stabilisation result in excellent flight handling characteristics. Different flying programmes ensure that both beginners
and experts will be able to have their fun.
The QuadroCopter can be used both indoors and outdoors. The in-built electronic controls can balance out small
undesired changes to the flight altitude, but cannot remove them completely. The QuadroCopter weighs relatively little
and this is sensitive to wind. Therefore, ideal flying conditions are complete lack of wind to very gentle and even wind.
The lightweight aluminium designer frame and synthetic components are sturdy and enable excellent flight handling
characteristics. The frame is collapsible and therefore space-saving and easy to transport. The designer frame con-
tains the complete set of electronics and has space for expansion plates. The grid construction makes for good
stability and good protection of the electronics at a low weight.
Due to its construction, the QuadroCopter is designed for experienced model helicopter pilots who do not just want to
carry out helicopter-like, but also sensational moves.
However, this extremely manoeuvrable model is also suitable for beginners! However, before the first flight, we recom-
mend that beginners follow an appropriate training program in a flight simulator for helicopters and/or seek active
assistance from an experienced model helicopter pilot.
The model can be expanded by additional electronics (expansion interface available on the control unit) and the
mounting of several mechanisms on the platform mount fixture on the underside of the grid frame
