24
d) Programming of “Yaw”
Now move the yaw lever (see figure 10) to the left
to full deflection and hold it there for at least one
second.
The QuadroCopter thus recognises the YAW chan-
nel and memorises this.
Move the YAW lever back to neutral position with
the THROTTLE still on zero.
As confirmation, the QuadroCopter’s red LED
flashes in a cycle of 3s (3 short flashes, then a pause
etc.)
During the respective configuration
step, the green LED shows the chan-
nel as long as the lever is still being
pushed! However, only the red LED is
important for the progress indicator!
During the programming process, please ensure that you only move the required lever, otherwise the setting will not
be recognised!
e) Programming of “Pitch”
Move the PITCH lever (see figure 11) to full deflec-
tion for GIVE PITCH upwards and hold it there for
at least one second.
The QuadroCopter thus recognises the PITCH
channel and memorises this. Move the PITCH le-
ver back to neutral position, continue to leave the
THROTTLE on zero.
As confirmation, the QuadroCopter’s
red LED flashes in a cycle of 4s (4x
short flashes, then a pause etc.).
Figure 10
Figure 11
