7
c) Receiver / antenna
• To prevent loss of control:
- Make sure the receiver battery is disconnected before turning off the transmitter.
- Do not power on the receiver during the setup process.
• For best signal quality:
- Mount the antenna is mounted perpendicular to the model body in an upright position.
- Mount the receiver away from motors, electronic speed controllers, or any device that can interfere
with the signal.
- Keep the receiver antenna at least 1 cm away from conductive materials such as carbon or metal.
• Protect the receiver from dust, dirt, moisture, heat, and vibration.
d) Transmitter
• Never point the transmitter aerial towards the model as it will decrease the range.
• The maximum range will be achieved when the aerial of the transmitter and model are both vertical.
e) (Rechargeable) batteries
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• The (rechargeable) batteries should be removed from the device if it is not used for a long period of time
to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might cause acid burns
when in contact with skin, therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable) batteries
lying around, as there is risk, that children or pets swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable)
batteries in the device can lead to (rechargeable) battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never recharge
non-rechargeable batteries. There is a risk of explosion!