background image

4

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!

  These operating instructions are part of this product. They contain important notes on commissioning and 

handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating 

instructions for reference!

If there are any technical questions, please contact:  www.conrad.com/contact

2. Explanation of symbols

  The symbol with the exclamation mark in the triangle is used to indicate important information in these 

operating instructions. Always read this information carefully.

  The arrow symbol indicates special information and advice on operation. 

3. Intended use

The transmitter has 4-channels and operates on a 2.4 GHz automatic frequency hopping digital system (AFHDS). It 

comes with a compact receiver that has an integrated antenna. The receiver uses standard PWM output. Extra chan-

nels are available for various switching tasks or control functions.
Contact with moisture must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes 

other than those described above, the product may be damaged. In addition, improper use can result in other hazards. 

Read the instructions carefully and store them in a safe place. Make this product available to third parties only together 

with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

•  Transmitter 
•  Receiver antenna

•  Hint sheet
•  Operating instructions (on CD-ROM)

Summary of Contents for 2267650




















Reviews: