Reely 1719347, Operating Instructions Manual

Page: 68 / 164

68
Figure 18
To switch on headless mode, briefly press the button for
headless mode (see also Figure 1, no. 8). Once headless
mode has been enabled, the transmitter will continuously
emit beeps and the LEDs on the quadrocopter will flash in
triple rhythm. The quadrocopter is now flying in headless
mode.
To switch headless mode off, briefly press the button
for headless mode again. The transmitter will emit three
beeps in quick succession and then eventually stop beep-
ing. The quadrocopter LEDs will glow steadily and the
quadrocopter will switch back to normal mode.
Important!
Headless mode should only be enabled if the
quadrocopter is operated in visual flight mode.
In FPV mode, headless mode is useless and
leads to control errors.