36
9. Setting Up the Transmitter
In the further course of these instructions, figures in the text always refer to the adjacent figure or the
figures within the section. References to other figures are indicated with the corresponding figure number.
a) Inserting the Batteries
The power supply of the transmitter requires 6 mignon batteries (e.g. Conrad Item No.: 652506, please order 6x).
Important:
Use batteries only (1.5 V/cell) instead of rechargeable batteries (1.2 V/cell) for transmitter power supply.
Proceed as follows to insert the batteries:
The 3 compartments for the transmitter batteries are
on the back of the transmitter casing.
Press up the latch of the medium battery compartment
lid (1) and remove the lid. Insert four mignon batteries
into the battery compartment according to the
indications at the bottom (2).
Then reattach the battery compartment lid and let the
latch (3) catch.
Slide the covers of the right and left battery
compartments (4) off downwards. Insert one mignon
battery each into the battery compartment according
to the indications at the bottom.
Slide on both battery compartment lids again from
below until the latches (5) catch again.
Figure 2
Summary of Contents for Micro
Page 110: ...110 ...
Page 111: ...111 ...
