REED 00 C50SS, Manual, Page: 28 / 84

REED
00 MODEL:
C50SS
TRAILER CONCRETE PUMP
OPER.
PAGE 27
•
Fill the hopper with water. Place the DIRECTION switch to the FORWARD position
and check that VOLUME control is set at low speed. Turn PUMP ON and cycle the
pump until the sponge passes through the entire delivery system.
It is suggested that a SPONGE CATCHER be installed
at the end of the delivery line to catch the sponge as it
is discharged from the line.
•
Turn OFF pump and allow the water to drain from the system.
•
Clean up the remaining areas of the machine hosing them down as appropriate.
PREPARE UNIT FOR TRAVEL
After the 00 MODEL C50SS has been thoroughly cleaned it can now be readied for travel.
•
Return THROTTLE control to IDLE position, and shut-off engine.
•
If remote control was used disconnect from control box and store in secure place.
•
Pick-up and store any wheel blocks, cones, delivery line and other equipment.
•
Clean up area around pump.
•
Connect unit to towing vehicle, raise outrigger legs and front jack.
REVISION: