REED 00 C50SS, Manual, Page: 18 / 84

REED
00 MODEL:
C50SS
TRAILER CONCRETE PUMP
OPER.
PAGE 17
OPERATION INSTRUCTIONS
Having
READ and UNDERSTOOD the previous pages on SAFETY and CONTROL
FAMILIARIZATION you are now in a position to learn how to operate the unit. If you have
not READ the previous pages we suggest you do so before PROCEEDING .
For your own SAFETY and others around you it is
your RESPONSIBILITY to insure the unit is in proper
working condition. Check out the unit by using the
PRE-OPERATION INSPECTION notes previously
identified.
OBSERVE ALL SAFETY PRECAUTIONS WHILE
OPERATING THIS MACHINE.
SELECTION AND SET-UP AT JOB SITE
Your first and primary concern when arriving at the job site is to insure the machine can be
safely operated and it will afford the maximum production efficiency without jeopardizing
safety.
•
The machine should be located on as level ground as is possible.
•
Lower the front leg jack to ground and if necessary place wooden blocking under the
jack pad.
•
Lower rear outriggers and pin in place. If necessary, place additional blocking under
the pads.
•
Lower and apply pressure to the front jack on the ground and if necessary place
wooden blocking under the jack pad. This will transfer weight to the outrigger legs.
DAMGE WILL OCCUR IF OUTRIGGERS ARE NOT
USED. WARRANTY WILL NOT BE HONERED IN THIS
SITUATION!
REVISION: