10
Resistance Measurements
1. Set the rotary switch to the Ω position.
2. Connect the test leads to the meter (see
Connecting
the Test Leads
section for details).
3. Touch the test probe tips across the circuit or
component under test as shown.
Note:
It is best to disconnect one side of the device under test so the
rest of the circuit will not interfere with the reading.
4. The LCD will display the reading.
Diode and Continuity Measurements
1. Set the rotary function switch to the Ω position.
2. Connect the test leads to the meter (see
Connecting the Test Leads
section for details).
3. Press the
MODE
button until the Diode Test indicator
appears on
the LCD display.
4. Touch the test probes to the diode under test as shown.
Forward voltage will indicate 0.4V to 0.7V. Reverse voltage will be
indicated by "OL". Shorted devices will indicate near 0mV and an
open device will be indicated by "OL" in both polarities. For
Continuity tests, if the resistance is <150, a tone will sound.
continued...
www.
.com
1.800.561.8187
