9
4. Press the Cover Mounts (106) on the underside
of the Rear Stabilizer Cover (15) into the Rear
Stabilizer (2).
4
2
106
15
5
5.
Tip: Avoid pinching the wires. Avoid damag-
ing the indicated plastic tabs.
Set the Upright
(4) on the Frame (1).
Attach the Upright (4) with four M10 x 25mm
Screws (99) and four M10 Split Washers (105).
Do not fully tighten the Screws yet.
Avoid pinching the
wires and avoid
damaging the tabs
Tabs
4
1
105
105
99
99
3
3. With the help of a second person, place some of
the packing materials (not shown) under the rear
of the Frame (1).
Have the second person hold
the Frame to prevent it from tipping while you
complete this step.
Attach the Rear Stabilizer (2) to the Frame (1)
with two M10 x 122mm Screws (104) and two
M10 Split Washers (105).
Remove the packing materials from under the
rear of the Frame (1).
1
2
104
105
Summary of Contents for 1210 Elliptical
Page 4: ...4...
