11
8
8. Identify the Right Upper Body Arm (61) and ori-
ent it as shown.
Slide the Right Upper Body Arm (61) onto the
Right Upper Body Leg (60).
Attach the Right Upper Body Arm (61) with two
M8 x 38mm Bolts (96) and two M8 Locknuts
(102).
Make sure that the Locknuts are in the
hexagonal holes.
Repeat this step for the Left Upper Body
Arm (47).
Hexagonal
Holes
60
61
47
96
102
9
7
4
9. Untie and discard the wire tie on the Main
Wire (111).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (111), to the Ground
Wire (110), and to the Sensor Wires (63, 136).
Insert the excess wire into the Upright (4).
63
111
110
136
Summary of Contents for 1210 Elliptical
Page 4: ...4...