Reebok 1210 Elliptical, Manual

Page: 23 / 40

23
HOW TO SET UP THE CONSOLE
Before using the elliptical for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download iFit
workouts, and use some other features of the con-
sole, you must be connected to a wireless network.
See HOW TO USE THE WIRELESS NETWORK
MODE on page 31 to connect the console to
your wireless network.
2. Check for firmware updates.
First, see step 1 on page 29 and step 2 on page
30 and select the maintenance mode. Then,
see step 3 on page 30 and check for firmware
updates.
3. Calibrate the incline of the ramp.
First, see step 1 on page 29 and step 2 on page
30 and select the maintenance mode. Then, see
step 4 on page 30 and calibrate the incline of the
ramp.
4. Create an iFit account.
Touch the globe button near the lower left corner of
the screen and then touch the iFit button.
Note: For information about navigating in the
Internet browser, see page 32.
The browser will open to the iFit.com home page.
Follow the prompts on the website to sign up for
your iFit membership.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 24. To use
an onboard workout, see page 26. To use a
set-a-goal workout, see page 27. To use an iFit
workout, see page 28.
To use the equipment settings mode, see
page 29. To use the maintenance mode, see page
30. To use the wireless network mode, see
page 31. To use the sound system, see page
32. To use the Internet browser, see page 32.
Note: If there is a sheet of plastic on the screen,
remove the plastic.
Note: The console can display speed and distance in
either miles or kilometers. To find which unit of mea-
surement is selected, see step 8 on page 29. For
simplicity, all instructions in this section refer to miles.