Redmond RMC-M90E, Manual

Page: 25 / 40

RMC-M90E
25
GBR
Before operating, make sure that the outer and inner parts of the multi-
cooker have no dents, cracks or any other visible damages. There should
not be any obstructions between the heating element and the bowl.
Setting The Cooking Time
Multicooker REDMOND RMC-M90E allows manually adjusting the cooking
time, set by default for each program (except “QUICK COOK”). Time adjustment
range and interval depend on the program of cooking selected. To set:
1. Select the cooking program. Press “Hour” button repeatedly to adjust
the hours. Hold the button down to scroll through the digits.
2. Press “Min” button repeatedly to adjust the minutes. Hold the button
down to scroll through the digits.
3. To set the cooking time of less than 1 hour press “Hour” button repeat-
edly to reset to zero. Adjust the minutes using “Min” button.
4. When the time is set (display keeps blinking) proceed to the next
stage in accordance with the program selected. To cancel all settings,
press “Reheat/Cancel” button and reset.
Manually adjusting the cooking time, consider time adjustment range and
interval of selected program, given in the table of default settings.
For your convenience the cooking time range in all programs starts with
the minimum setting, enabling you to prolong the operating time of the
program, if the dish is undercooked.
In certain automatic programs countdown starts only when the device
reaches its operating temperature. E.g. If you set “STEAM” program on 5
minutes, the countdown of the program begins only when the water comes
to a full boil providing enough steam. In “PASTA” program, the countdown
begins after water starts boiling and “Start” button is being repressed.
Time Delay Function
This function allows setting the program to finish by certain time. Cook-
ing time may be delayed for a period from 10 minutes to 24 hours with
10 minute intervals. Setting Time Delay function, take the cooking time
of the program into consideration. The time of a delay should be longer
than the cooking time of the program selected; otherwise the program
starts running right after you press “Start”.
When the automatic program is selected and the temperature and cook-
ing time are adjusted, you may set the “Time Delay”.
1. Press “Time Delay” button to enter the Time Delay setting mode. The
words Time Delay are displayed. Timer is blinking.
2. Press “Hour” button repeatedly to adjust the hours in 24 hour format.
Hold the button down to scroll through the digits.
3. Press “Min” button repeatedly to adjust the minutes. Hold the button
down to scroll through the digits.
4. If you need to set the delay of less than 1 hour, repeatedly press
“Hour” button to reset to zero and adjust the minutes using “Min”
button.
5. To cancel the settings press “Reheat/Cancel” button and reset.
6. When the time is set press and hold down the “Start” button. Time
Delay function indicator lights up. Set program starts running and
the countdown begins.
7. Your meal will be ready when the time set expires. When the program
finishes, the device automatically switches to “Keep Warm” (“Reheat/
Cancel” button indicator lights up).
8. Press “Reheat/Cancel” button to cancel the “Keep Warm”. Button in-
dicator goes off.
Time Delay function is available in all automatic programs except “FRY”,
“PASTA” and “QUICK COOK”.
It is not recommended to use Time Delay function if dairy and other perish
-
able products are being used (eggs, fresh milk, meat, cheese etc.).
Setting the “Time Delay” in “STEAM” program remember that the countdown
starts only when the device reaches its operating temperature (water comes
to a full boil).
Keep Warm Function
Function is being automatically activated at the end of the cooking program.
When the program finishes, the temperature of the meal (70–75°C) is being
maintained for a period of time up to 24 hours. “Reheat/Cancel” button in-
dicator lights up and the “Keep Warm” count up is being displayed. Press and
hold down “Reheat/Cancel” button to disable the function.
Disabling The “Keep Warm” In Advance
Automatic activation of the Keep Warm function at the end of the program
may sometimes be undesirable. REDMOND RMC-M90E allows disabling the
function in advance, while setting the program or during its operation. Press