RedMax AN-100U, User Manual, Page: 71 / 106

Red MAX
™
Base Station
user manual
Doc. #70-00058-01-01-DRAFT Proprietary Redline Communications © 2006 November 29, 2006
Page 71 of 106
5.2 CLI Modes
The base station CLI interface supports direct commands and modes.
5.2.1 Common Controls
Use the following CLI control commands in all configuration modes.
Table 19: CLI - Root Mode Commands
Command Description
?
Use the '?' character to display help for any command or mode.
Example: From the root directory, enter the following command to list all
parameters that can be changed using the 'set' command:
set
?
CTRL-Z Return to root mode.
Cancel command entry (alternative to backspace delete).
Return to parent node / mode.
exit
all (exit all) Return to parent mode.
logout Terminate this telnet session. May be entered from any mode.
5.3 CLI Command
The system defaults to root mode when you login to the base station. The following table
lists all base station specific commands available in root mode. All commands are case-
sensitive.
The following table lists commands available in the root directory. These commands are
described in detail in the following sections.
Table 20: CLI - Command Summary
Command Description
interfaces View and configure the data and management Ethernet ports.
ipAddress View and configure the IP address data structure.
logout Exit from Command Line Interface.
monitor Enter into monitor mode, press any key to exit.
reboot Reboot the device box.
set Command mode to view and configure system settings.
show Command mode to view system settings.
softwareConf Backup/restore base station settings to/from FTP server.
softwareUpgrade Download software and select the active version.
user
View and configure user accounts.
wmanIfBs View and configure wireless MAN interface objects.
x509 WMAN-IF-MIB X509 certificate data.