manualshive.com logo in svg

RedMax AN-100U, User Manual, Page: 2 / 106

Share
Download
RedMax AN-100U User Manual Download Page 2

 Red

MAX

™

  

Base Station

 

user manual

 

 

 

 

 

Doc. #70-00058-01-01-DRAFT 

Proprietary Redline Communications © 2006

 November 

29, 

2006 

Page 2 of 106

 

 

Copyright Information 

All rights reserved November 29, 2006. The information in this document is 
proprietary to Redline Communications Inc. This document may not in whole or 
in part be copied, reproduced, or reduced to any medium without prior consent, 
in writing, from Redline Communications Incorporated.

 

 

Contact Information: 

 

Redline Communications Inc. 

 

302 Town Centre Blvd. Suite 100 

 Markham, 

ON 

 

Canada L3R 0E8 

Web Site

:  

 

http://www.redlinecommunications.com

 

Sales Inquiries: 

   North American:  

[email protected]

 

   Toll-free sales: 

1-866-633-6669 

   International: 

  

[email protected]

 

Support:  

www.redlinecommunications.com/support/support_portal.html

 

Document Control: 

70-00058-01-01-RedMAX_BaseStn_UserMan_100U-20061128a.doc

 

Disclaimer 

The statements, configurations, technical data, and recommendations in this document 
are believed to be accurate and reliable, but are presented without express or implied 
warranty. Additionally, Redline makes no representations or warranties, either expressed 
or implied, regarding the contents of this product. Redline Communications shall not be 
liable for any misuse regarding this product. The information in this document is subject 
to change without notice. 

Revision History 

Date: 

Rev. 

Auth.  Comments 

Jun. 5, 2006 

01.00 

SB 

Product Release 

Aug. 24, 2006  01.00A  SB 

• 

Add note about classifier priority 

• 

Added Radio Type 19, deleted ref. to T7 type 

• 

Add ref. to cable compensation 

• 

DC input range 21-60 VDC 

• 

Add formula for channel range and regulatory 
cautions when making channel selection 

• 

Update DHCP and SNTP/ToD service info. 

• 

Update GPS synchronization information 

• 

Add VLAN tagged management traffic 

• 

Add Syslog server 

• 

Add 3.6-3.8 radio 

 

Summary of Contents for AN-100U











































































































Reviews:

No comments