Redexim Verti-Drain 2519, User Manual And Parts Book, Page: 31 / 31

31
13. TROUBLE SHOOTING (PROBLEM ANALYSIS)
Problem Possible cause Solution
Machine vibrates. Crankshaft turns irregularly. - Machine is not horizontal.
- Angles of the PTO’s turning points are
different.
Difficult conditions - PTO’s turning points are not aligned.
- Adjust the working depth.
- Use shorter / thinner pins.
- In case of drought, first sprinkle water.
Solid / hollow pins break
and/or bend. - Change the pin; use shorter ones.
- Use solid pins in front of the hollow
pins to break the soil open.
Difficult conditions - Adjust the working depth.
- Use shorter / thinner pins.
- In case of drought, first sprinkle water.
Rapid wear & tear - First use solid pins to break up the
soil.
- Adjust the pin angle.
Front roller does not stand
stable on the ground. Wrong pins; too much
resistance - Adjust the working depth.
- Use different pins.
Difficult conditions - Adjust the working depth.
- First sprinkle water.
PTO breaks. Shafts crack. - PTO angles are too large.
- Angles of the PTO’s turning points are
different.
Damage to the absorbers Bending / breaking - Machine is not horizontal.
- Angle adjustment of the central bar is
bent.
- Bearing bushes are worn out.
- Pins touch the ground when reversing
the machine.
Damage to the lawn Oval holes - Soil is too wet.
- Change the pin angle setting.
- Reduce the forward driving speed.
- Adjust the working depth.
- Use thinner pins.
- Turn the pins so that the points are
directed toward the rear side of the
machine.
Pin comes loose from the
pin holder.
Difficult conditions - Use different pins.
- Grind a flat part to the pins.
- Adjust the pin angle.
Crankshaft problems Big-end nuts come undone. - Determine the place of the vibration in
the machine and rectify this.
- Crankshaft bearing is worn.
- Incorrect assembly after repair
Distance between the
holes is irregular. V-belts are slipping. - Tension the V-belts.