Redexim Verti-Drain 2519, User Manual And Parts Book, Page: 19 / 31

19
11. OPTIONS
11.1 Peat hold-down kit
Figure 9
You can use a peat hold-down kit if grass has come loose.
Two types of peat hold-down kits are available for the Verti-Drain
® 2519:
- 12 mm (1/2”) pins: article number 211.251.902
- 18 mm (3/4”) pins: article number 211.251.904
A standard feature of the Verti-Drain
®
2519 is a fastening section to which you can attach the peat
hold-down fingers.
This kit consists of a set peat hold-down fingers and the fastening material consisting of a number of
bolts and nuts.
MOUNTING THE PEAT HOLD-DOWN KIT
-
Included in the ordered set are the plates. Attach the plates to the main bar using bolt, rings
and nut. Align the plates with the pins via the slotted holes in the plates.
- If the plates are bent in one direction after extensive use, you attach them the other way
around.
Check the length of the shock absorber if the pins touch the front side of the hole
during work activities (see Section 12.4).
NEVER crawl under the machine! Make sure the machine is firmly blocked!