17
10. TECHNICAL INFORMATION
Generally speaking, the Verti-Drain
®
2519 is not a complicated machine. A number of technical issues
will be explained. If you still have questions, please contact your dealer who is always ready to assist
you.
10.1 Adjusting the working depth
The working depth can be adjusted, when the machine is lifted before the start of the work.
Figure 7
To adjust the working depth (see Figure 7):
!!
Switch off the tractor’s engine and PTO before descending !!
!!
Make sure that the tractor and machine cannot move uncontrolled !!
1. First, loosen with a single turn the nuts
(2)
of the front roller at both sides of the
machine.
2. Rotate the roller to the required working depth using the spindle nuts
(1)
at both sides
of the machine.
Use the ring spanner delivered in the toolbox.
3. Use the indication stickers
(3)
at both sides of the machine to find the correct working
depth.
The depth adjustment on the stickers applies only if one uses pins of 250 mm (10“). If
shorter pins are used, deduct the difference in length compared to the 250 mm (10”)
from the values on the sticker.
Make sure that the same working depth is set at both sides of the machine. Different
settings can damage the machine.
4. Tighten the nuts
(2)
of the front roller.
Summary of Contents for Verti-Drain 2519
Page 28: ...28 Figure 18...