20
11.2 Windrow kit
If you work with hollow pins, plugs or cones are removed out of the ground.
The windrow kit takes care of centring the cores in the middle of the work path after the treatment.
Afterwards, the cores can easily be removed.
The windrow kit is available under article number 211.251.908 (see Figure 10).
Figure 10
11.3 Pins
Different types of pins are available for this machine.
Generally speaking, the pins can be divided into two categories: solid and hollow pins.
The next page details the differences in operation between the solid and hollow pins.
Each category consists of various diameters and lengths. See the Parts page for a complete overview.
We recommend using only original Redexim pins, because these are developed for the best result and
wear resistance,
The locking bolts (A) may be tightened with a torque of 40 Nm/29.5 lbf.ft (see Figure 11).
If the locking bolt does not hold the pins sufficiently, then grind a flat part to the
assembling side of the pin.
Figure 11
Summary of Contents for Verti-Drain 2519
Page 28: ...28 Figure 18...