24
12.2 Cleaning
If a high-pressure cleaner is used to clean the machine, then observe the following rules:
Do not use aggressive cleaning agents that can affect the machine.
Maximum water pressure: 70 Bar (1015 PSI)
Maximum water temperature: 50°C (122°F)
Do not aim the jet of the high-pressure nozzle directly at the bearings, oil seals,
lubrication points and stickers.
Keep a minimum distance of 0.5 m (1.6 ft) between the head of the high-pressure
cleaner and the surface you want to clean.
Grease the bearing points after cleaning the machine.
12.3 Lubrication points
To guarantee the proper functioning of the machine, all lubrication points at both sides of the machine
must be greased periodically (see Figure 14). Grease these points according to the maintenance
schedule (see
Section 12.1
).
Figure 14
Summary of Contents for Verti-Drain 2519
Page 28: ...28 Figure 18...