9
3.0 FIRST INSTALLATION – TAKING THE MACHINE OFF THE
PALLET/GETTING IT READY FOR USE
Figure 6
The machine is placed on the pallet. To remove the pallet and to place the machine on the
ground, you take the following steps
(see Figure 6)
:
NEVER CRAWL UNDER THE MACHINE!
1. Attach a cable to the upper 3-point (1) and at the hoisted supports (2) at both sides of
the machine.
Make sure that the cable/crane/lift can hoist minimum 2x the weight of the
machine. (machine weight see Chapter 1.0 Technical data)
2. Lift the machine so the cables come under tension.
3. Remove the bottom 3-point connection
4. Lift the machine off the pallet (3) and pull the pallet from under the machine.
5. Lower the machine controlled and calmly until it stands completely on the ground.
CAREFUL: KEEP YOUR DISTANCE; THE MACHINE CAN SLIDE!
6. Remove the cable.
7. The machine is no ready for use.
8. Connect the machine to the tractor (please refer to Chapter 4.0).
