3
SAFETY INSTRUCTIONS
Figure 1
The Easy Spread is designed for safe use. This
can only be achieved if you completely follow the
safety instructions described in this manual.
Read and understand
(figure 1) the manual
before you use the Easy Spread.
If the machine is not used as described in this
manual, this can result in injuries and/or damage
to the Easy Spread.
(1) The Easy Spread is only intended for gritting fine-grained materials (sand, pebble stones
and the like).
Any other use is improper. The manufacturer will not accept any liability for damage
resulting from improper use. All risks occurring with this are entirely at the expense of
the user.
Following the use, maintenance and repair instructions prescribed by the manufacturer
is also considered proper use of this machine.
The manufacturer will not accept any liability for unprofessional use and its resulting
damage. All risks occurring with this are entirely at the expense of the user.
Following the use, maintenance and repair instructions prescribed by the manufacturer
is also considered professional use of this machine.
Inspect the area to be treated
before
using the Easy Spread. Remove loose obstacles
and avoid irregularities.
(2) The Easy Spread is manufactured according to the latest technical understanding and is
safe to use.
When unskilled people use, maintain or repair the machine, this could result in injuries to
the user
and
to third parties.
This must be avoided!
Always use the Easy Spread in combination with the correct tractor as described
in the technical data.
(3) All persons assigned to operate, maintain and repair the Easy Spread by the owner must
completely read and understand the operation manual and in particular the chapter of
Safety Instructions
.
The user is responsible for a
safe Tractor/Easy Spread combination
.
This entire
combination must be tested
for noise, safety, risk and user friendliness. User
instructions should also be drafted.
(4) The user is
obliged to check
the Easy Spread for
visible damage and defects
before
using it.
Modifications to the
Easy Spread
(including its operations) that have a negative impact
on safety must be rectified immediately.
For safety reasons it is in principle not permitted to make changes or adjustments to the
Easy Spread
(except those approved by the manufacturer).
