2 SPEED GEARBOX
User manual
Ref.: RX142/046
Version 09/05/2017 - English
This document must not be reproduced nor information therein disclosed without our authorization
Page 18 / 35
3.3.2 Gearbox without motor flange
MSRXXX . A H 5 S . 2076 M2 .
00
J42 . D . SS
The 2 input flanges (intermediate flange and customer‟s motor flange) must be sealed before
being mounted on the gearbox. The following instructions must be followed:
A.
Clean and degrease all surfaces.
B.
Seal the gearbox input flange (see example on the pictures below).
Sealing of the housing before mounting the intermediate flange.
C.
Bring the intermediate flange.
D.
Seal the intermediate flange (see example on the pictures below).
Sealing of the intermediate flange before mounting the motor flange.
E.
Bring the motor flange onto the intermediate flange.
F.
Tighten the screws to the appropriate tightening torque (see table).
Summary of Contents for MSR 330
Page 39: ......
