KRPX+ User manual
Ref.: RX182/010
Version 01/2017 - English
This document must not be reproduced nor information therein disclosed without our authorization
Page 12 / 24
4.2
KRPX+ perpendicularity tolerances
4.2.1
Set up data
Adjusting the perpendicularity of the pinion axis to the rack by controlling the parallelism between the front
face of the KRPX+ and the rack
SIZE
Maximum parallelism errors
between KRPX+ front face and rack
LZ(1) - LZ(2)
KRPX1+
0.020 mm
KRPX2+
0.020 mm
KRPX3+
0.025 mm
KRPX4+
0.025 mm
KRPX5+
0.030 mm
4.2.2
Set up method
Using key way
Without using key way
Use the key way on gearbox bottom fixing plate to
adjust perpendicularity.
Redex
recommends
manufacturing
a
shoulder in the machine frame and to lean
the KRPX front face against it. The front face
is a ground reference surface.
