BlackMax – Installation Manual
RE_PROD_0005 Version 4
Page 20 of 32
Issue Date 23/03/2021
Step 8.
Commissioning
The BlackMax is commissioned and tested in RedEarth’s factory to guarantee correct operation of
the system as ordered. However, last-minute parameter adjustments may be required (eg. generator
size/ charging rate or increasing energy storage). Carefully follow the procedure in the SurePower
Quick Start Guide on how to make these alterations without compromising the existing configuration.
NOTE: This must be done by a qualified person.
The original SurePower, display and battery manuals are included in the system. These may need
to be referred to for additional details required during setup and programming.
Fan Control Adjustment:
The thermostat is located inside the unit next to the GPO’s.
This automatically starts the fans once the temperature rises
above the set-point. This set-point can easily be adjusted with
a small screwdriver. It is set to 30
⁰
Celsius in the factory.
Installation
