BlackMax – Installation Manual
RE_PROD_0005 Version 4
Page 14 of 32
Issue Date 23/03/2021
Removing or Installing a US3000:
To remove or install a battery, you will need to follow these steps:
•
Remove the battery cables by pressing the button on the
side of the terminal and pull it straight up;
NOTE: When installing the battery cable, simply push it onto
the terminal until you hear a click.
•
Remove the CAT5 cables
•
Remove the bolt that holds the earth cable to the battery;
•
Remove the bolts the hold the lid down;
•
Lift out one battery at a time. Be careful handling as each
battery weighs 32 kilograms.
To install a battery, follow this process in reverse.
ATTENTION: If the battery polarity is connected incorrectly it will damage the
BlackMax system.
Installation