BlackMax – Installation Manual
RE_PROD_0005 Version 4
Page 18 of 32
Issue Date 23/03/2021
Turn ON (Troppo)
To
turn on
the unit you must follow the steps below:
1 Under the lid, switch ON the battery breakers on the top of each Troppo battery. The LED
on each battery will come on.
2 Switch ON the BATTERY SYSTEM D.C. ISOLATOR (#4), found on the RHS of the unit;
3 Switch ON the SOLAR D.C. ISOLATOR (#3), found on the RHS of the unit;
4 Turn ON all AC circuit breakers (#2), found on the LHS of the unit;
5 Press the “On/Off” button (#1) on the display, found on the lid of the unit;
NOTE: The numbers on the equipment are in descending order. The ascending sequence is the
Shutdown procedure.
1
2
3
4
5
Installation
