BlackMax – Installation Manual
RE_PROD_0005 Version 4
Page 6 of 32
Issue Date 23/03/2021
Opening the BlackMax
RedEarth’s BlackMax energy storage system can
be accessed via the top (lid) or the front door.
To open the lid, 2 screws (one from each side)
must be removed and then the lid can be lifted and
pivoted on the rear hinge similar to “popping the
bonnet” of a car.
To access from the front, there are 2 locks that
must be operated on the front door. The key to
open these locks comes tied to the left handle and
must be kept out of the reach from children.
Inside
The BlackMax can be divided into four main areas, The AC side, the DC side, the inverter, and the
battery area. By opening the front door - as explained above – you will have access to the AC side,
inverter area, and DC side. To access the AC or DC side, you will have to remove the acrylic barrier
that is held in place by 3 nuts. Finally, to access the battery area, all you need to do is “pop the
bonnet”. This is procedure explained in “Opening
the BlackMax”.
Note: When closing, do not over tighten the
nuts holding the clear cover in place as it will
crack under pressure
.
Components
