COPYRIGHT © 2013 RED.COM, INC
DSMC POWER OPERATION GUIDE
955-0038, REV-A | 38
INSERT A REDVOLT BATTERY
1. Lower the REDVOLT down directly onto the charger.
2.
Apply pressure until you hear a click and the battery is seated properly.
WARNING:
DO NOT insert REDVOLT battery at an angle connector side first as this may damage the connector
or charger.
REMOVE A REDVOLT BATTERY
1. Hold the REDVOLT battery and pull the battery directly off of the charger.
REDVOLT CHARGER (QUAD)
The REDVOLT CHARGER (QUAD) is the fastest way to charge up to four REDVOLT or two REDVOLT XL batter-
ies. All batteries charge simultaneously, with up to 1.75 A distributed evenly to each cell until fully charged. The
REDVOLT CHARGER (QUAD) can charge multiple REDVOLT or REDVOLT XL batteries in two (2) hours or less.
NOTE:
Charging will automatically stop if battery voltage or temperature exceed 0˚C to 40˚C (32˚F to 104˚F).
REDVOLT CHARGER (QUAD) CHARGER INDICATORS
The light on the DSMC TRAVEL CHARGER displays a specific color and pattern indicating the state of charge.
COLOR PATTERN
DESCRIPTION
Solid red
Charger ON, no battery connected
Flashing yellow
Charger ON, battery connected and charging
Solid green
Charger ON, battery fully charged
Flashing red/green (alternating)
Charger ON, fail condition
REDVOLT CHARGER (QUAD)