RED Dalia Oyster, Use And Maintenance Manual

Page: 40 / 44

PELLET STOVES Chapter 6
red
INSTALLATION AND USE MANUAL
page
40
Problems/Causes/Solutions Technical service - Rights reserved - Reproduction prohibited
6.
PROBLEMS / CAUSES / SOLUTIONS
WARNING:
GUIDE FOR THE EXCLUSIVE USE OF THE
SPECIALISED TECHNICIAN.
WARNING:
All repairs must be carried out exclusively by a
specialised technician, with the stove completely cold
and the electric plug pulled out.
The operations marked in bold type must be carried
out by specialised personnel.
The manufacturer will not be liable and the guarantee
lapses if this condition is not respected.
PROBLEM
LED
POSSIBLE CAUSES Solutions:
The stove signals
failed ignition
Led 2.
 The screw feeder is empty for first ignition or
due to the pellets running out
 The hopper is empty
 The screw feeder is blocked by foreign
bodies
 The gear motor is faulty
 Wait for the pellet to be
loaded
 Fill the hopper
 Free the screw feeder
from foreign bodies
 Replace the faulty
component
The stove signals
anomalous stove
shutdown
Led 1.
 The pellet is not emitted into the combustion
chamber
 The fuel hopper has emptied out
 Low pellet feed rate.
 Unsuitable pellets.
 Door open
 Grate dirty
 Gaskets worn
 The screw feeder is blocked by foreign
bodies
 The gear motor is faulty
 Wait for the pellet to be
loaded
 Fill the hopper
 Increase the pellet load
following the instructions in
section 4.10
 Remove the unsuitable
pellet from the hopper and
exchange it with one
recommended by the
manufacturer
 Check that the door is
properly closed
 Clear the grate of
obstructions section 5
 Change the gaskets
 Free the screw feeder
from foreign bodies
 Replace the faulty
component