3. On the Slave camera(s), follow the instructions below:
A. Go to
Menu
>
Settings
>
Setup
>
Communication
.
B. Type a name for the camera (Example: CAM B, RIGHT, SLAVE, etc) in the
Camera ID
field.
C. Set
Target
to
None
.
Figure: Slave Settings
D. Go to
Menu
>
Settings
>
Setup
>
Communication
and select the
Ethernet
tab.
E. Select the
Camera to Camera
check box.
The LAN indicator in the Lower Status Row illuminates green.
NOTE:
Cameras can also be set up in a Master/Master configuration. To set up Master/Master, set
Target
to
All
on both cameras, allowing either camera to make changes and control record start/stop.
REQUIRED CABLE
790-0163
: Master/Slave Gig-E Cable (4')
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D
|
1 5 5
RED RANGER OPERATION GUIDE
