SET UP INTERNAL TIMECODE
To set up and adjust timecode generated by the camera, follow the instructions below:
1. Go to
Menu
>
Settings
>
Project
>
Timecode
.
2. Select the desired
Timecode Display
mode.
3. Set
Source
to
RTC
.
The
TC
indicator in the Lower Status Row remains grey when internal timecode is enabled.
Figure: Timecode
INPUT EXTERNAL TIMECODE
To input timecode generated by an external device, follow the instructions below:
1. Connect the
TIMECODE
port on the camera to the device using a 75 ohm BNC cable.
2. Go to
Menu
>
Settings
>
Project
>
Timecode
.
3. Select the desired
Timecode Display
Mode.
4. Set
Source
to
External
.
The
TC
indicator in the Lower Status Row turns green when an external timecode source is locked.
NOTE:
When an external source is selected but not present, timecode displays User Provided settings.
REQUIRED CABLE
790-0212
: PRO I/O TIMECODE CABLE (3')
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D
|
1 5 0
RED RANGER OPERATION GUIDE
